Latest tungsten womens wedding rings suppliers for men

                                                                                                                                                                       how to measure ring sizeRings are a very popular accessory at the moment, suitable for many people, but there is also a problem: what should I do if I don’t know the size of my finger? I will teach you a few methods to measure the size of the ring, which is simple and accurate.1. Paper strip (string) measurement methodYou need to prepare three things: a piece of A4 paper, a pen, and a ruler. First, cut a long strip of paper with a width of less than 1cm from the extended edge of the A4 paper, and then wrap the strip around the fingers twice, remember to make a circle at the largest point of the finger joints, the tightness is mainly based on comfort, and use the pen to overlap Mark the position, and finally lay the strip of paper flat, and measure the distance between the two points with a scale, which is the finger circumference of the finger. If a string is used, it is the same as the paper strip, but it should be noted that the string should be as non-elastic as possible.2. Professional tool measurement methodThere is a ring size rod specially used to measure hand inches. This tool has a series of rings of different sizes. Put a suitable ring on a finger to be measured, and then remove the ring and put it on the ring rod. Just get the value. This ring size bar is more commonly found in jewelry stores.3. Ring inner diameter measurement methodIf you have worn a ring before, you can print the inner diameter on the paper, measure it with a scale, and then compare it with the size chart. It should be noted that the pen should be perpendicular to the paper, and try to choose a pen without edges and corners, otherwise errors are prone to occur. There is also a more convenient way to buy a ring size stick, just use the previous ring sleeve to mark the scale on it.Note: In the process of measuring the size of the ring, try to keep the temperature balanced, do not overheat or cool, because the fingers will expand and contract due to the temperature, resulting in inaccurate measurement; if it is winter, it is recommended that the size be in a comfortable size The foundation is a little looser, if it is summer, it is mainly comfortable, or a little tighter.These three measurement methods are suitable for online shopping of rings. They are simple, accurate and convenient. You can choose a measurement method that suits you. However, please note that the size of the ring is divided into Hong Kong version, American version, mainland version and European version. etc., so remember to check the size comparison table of the corresponding version after measuring.Foshan Keke Jewelry is a professional manufacturer of stainless steel rings, stainless steel wedding rings, custom Christmas rings and custom Christmas jewelry!

                                                                                                                                                          Ring measurement method    There are three methods for measuring the ring hand circumference: simple daily measurement method, professional tool measurement method, and jewelry store measurement.1. Simple daily measurement methodPreparation tools: a piece of inelastic string (you can also use a long piece of paper instead), a pen, a ruler with a scale.A. First, wrap the string or long strip of paper around your finger, pay attention to measure at the largest part of the finger joint, neither too tight nor too loose, whichever is more comfortable.B. Then mark the intersection on both sides with a marker, and take out the string or paper strip.C. Finally, measure the distance between two points with a ruler with a scale, and compare the size of the finger circumference.Note: There will be some errors in this measurement method. It is recommended to measure several times and take the middle value of the scale to reduce the error. In addition, it should be noted that the measurement of finger size should also pay attention to the season. Because of the principle of thermal expansion and contraction, it is not suitable for measurement when the weather is too cold or too hot.2. Professional tool measurementThere is a special tool for measuring finger size called a ring size rod, which consists of a graduated size rod and a ring of rings of different sizes. The usage is to wear the rings one by one, find the most comfortable ring, put it on the ring stick and read the engraving.3, jewelry store measurementIf you are afraid that your measurement is not accurate enough, you can go to the jewelry store in person and let the clerk conduct professional measurements and provide professional services.After measuring the ring size, it should also be noted that the standards of the ring size comparison table in different countries are different, that is to say, the ring size corresponding to the same finger circumference is different. Therefore, when buying a ring, be sure to understand the comparison table of the brand of the ring, and find the corresponding size number according to the comparison table of the brand.  Foshan Keke Jewelry Co., Ltd. is a Chinese jewelry supplier specializing in the production of stainless steel jewelry and custom stainless steel jewelry, which can help customers customize stainless steel rings and stainless steel pendants!

Nowadays, many people like to wear some silver jewelry on their bodies. Especially some silver jewelry with a long time, are very easy to turn black. Partly because of dirt stuck inside the gaps of the pattern, and partly because of oxidation.Many people have to go to a jewelry store for maintenance, but each time they charge a fee for maintenance. It's an expense to accumulate several times. In fact, you can clean it yourself at home. It is also easier to use some common things at home. Here are 5 ways we'll learn how to clean silver jewelry at home1 Use toothpaste and a toothbrush to scrubThe first method is to squeeze some toothpaste on the silver jewelry where there is black, it has a whitening function itself. And there will be rubbing agents in it, and you can remove some of the dirt very well. After squeezing it on we use a toothbrush dipped in a little bit of water and then just brush it over and over again. But the brush better not be too hard, because it has a soft texture. It is easy to brush out scratches, brush clean and then we rinse. You can see that the silver jewelry has become shiny again.2 Find a special cloth for jewelry cleaningWe can buy a special cloth to wipe it. General jewelry stores or Amazon can be purchased. It's easy to use, just take it out and rub it against the silver jewelry. It is very easy to wipe it clean. And this piece of cloth is not expensive. So it is also very recommended to use such a method.3 Use jewelry cleanerIn fact, cleaning it also has a special cleaner, spray a little on it, and then repeatedly wipe with a wet towel. This way the silver jewelry will soon become very shiny. After wiping it we can put it in the sun for a while, it can also eliminate the poison, but also let the moisture dry quickly to prevent it from oxidizing and turning black again.4 Drops a few vinegar or teaYou can drop a little vinegar or tea water on top of the silver jewelry, but do not soak it in it directly. Because this may damage the jewelry. After a few drops of vinegar or tea then wipe it with a wet hanky. Remember, when cleaning it must not use a wire ball, this is very harmful. Just choose a softer toothbrush and brush it gently. Then we will rinse it off again and it will be fine.5 Soak into colaWe can also find a cup, and then pour some cola into it, and then put the silver jewelry into the soak. After ten minutes, we take it out and wipe it off with a wet handkerchief. The oxidized parts can also be easily removed. The acidity of Coke is not as strong, so it will be less harmful.Have you learned the above five ways to clean silver jewelry? If you don't wear it, make sure to seal it with a bag to prevent it from coming into contact with the air. This can be longer and better to preserve it Foshan KeKe Jewelry Co., Ltd. specialized in manufacturing quality silver jewelry and stainless steel jewelry, We have a powerful R&D and designer team, and a high-efficiency jewelry production line. We can provide professional customized services for global customers.

                                                                                                                                                               Introduction to RubyThe hardness of ruby is 9, the texture is hard, and the color is red. Natural rubies are rare, and are generally synthetic gemstones on the market. Natural rubies are distributed in Myanmar, the United States and other places, and are transparent to opaque, with a sense of luster. It is recommended to remove the ruby jewelry when doing housework or sports, and try to avoid friction and collision.The hardness of ruby is 9. It belongs to a kind of corundum. The texture is relatively hard. It is mainly composed of alumina and its color is red. Natural rubies are very rare. Generally, synthetic rubies appear on the market.Natural rubies are generally distributed in Myanmar, Thailand, Australia, the United States and other regions. They are usually transparent to opaque, with vitreous luster and diamond luster. The light is very dazzling, the color is bright and beautiful, and the shape is plate and barrel.Although ruby is hard in texture, it is brittle and easy to wear or chip. It is recommended to remove ruby jewelry as much as possible when exercising or doing housework. Be careful to avoid friction or sudden collision.Foshan Keke Jewelry Co., Ltd. is a professional manufacturer of stainless steel ruby rings and custom stainless steel earrings inlaid with rubies.