loading

OEM, ODM and professional wholesale custom jewelry manufacturer and supplier

运送到

9 common stainless steel jewelry processing techniques?

by:Keke Jewelry     2022-07-24
Knowing some common stainless steel jewelry processing techniques can make your understanding of titanium steel jewelry go further. KEKE jewelry processing factory summarizes the following 9 common processes.

1. Inlaid carbon fiber

Carbon fiber is used on stainless steel jewelry, which can make the surface of the jewelry have a three-dimensional fibrous shape, and if it is reflected by light, it will move up and down with your sight, showing a three-dimensional effect, which is very beautiful and can fully display the stainless steel jewelry. The trend is relatively, the price of carbon fiber inlaid in titanium steel jewelry is also relatively expensive.

2. Inlaid resin

For stainless steel jewelry workers to inlay resin, first heat the jewelry with high temperature, and then smear the resin on the surface of the jewelry. Because of the heating treatment, it will not fall off easily during the wearing process.

3. Wire cutting

One of the processes of stainless steel jewelry processing is wire cutting. The use of wire cutting technology is to use molybdenum wires of different sizes and a wire cutting machine to cut out the shape of the jewelry at a very slow speed, and then polish it by hand. The more complex and difficult styles, The longer the shipping time.

Four, inlaid zircon

There are two ways to inlay zircon in stainless steel jewelry processing. One is to use AB glue to directly stick it. This is a special glue for pasting jewelry. There is another kind, that is to use machine pressing, the workmanship is complicated and fine, but the price will be much more expensive than AB glue.

5. Polished surface

The polishing process used in jewelry processing factories, in simple terms, is to apply polishing wax on the high-speed rotating cotton polishing wheel, and by touching the cloth wheel with jewelry, the surface of the jewelry becomes bright and can also reflect light.

6. Sandblasting

Working principle: Put the sand in the water, use the grinding fluid pump and compressed air, and spray the grinding fluid onto the surface of the stainless steel jewelry at high speed through the spray gun, so as to form a layer of silver-gray coating, which makes the jewelry look more beautiful and has the effect of not easy to fade. .

7. Precision die casting

The process commonly used in jewelry processing plants is precision die-casting. Generally, first use wax to carve out the sample of the jewelry you want to make, then put the sample in gypsum, dewax, dissolve the raw material at a high temperature of 1500~2000 degrees, and then pour it into the gypsum mold, and then pressurize , demoulding and manual polishing and other processes are also more complicated processes. Different plaster molds are required for die casting, and the price will vary.

Eight, pulling sand noodles

The sandblasting process uses a sandpaper belt to make the surface of the stainless steel jewelry into a frosted effect, so that the surface of the jewelry presents a matte effect.

Nine, vacuum plating

There are several types of vacuum electroplating in jewelry processing plants. The vacuum electroplating process used in stainless steel jewelry processing is mainly vacuum electroplating in the furnace. Such a film can form a protective film on the surface of the jewelry, and coat the 18k gold film layer, which can prolong the color retention time. Wait.






Foshan KeKe Jewelry Co., Ltd. ’s administrative systems and management team are extraordinary-you'll need them to get a new location up and running.
Foshan KeKe Jewelry Co., Ltd. are a market-focused, process-centered organization that develops and delivers innovative solutions to our customers, consistently outperforms our peers, produces predictable earnings for our customers, and provides a dynamic and challenging environment for our employees.
Looking for Manufacturers in China? Then Foshan KeKe Jewelry Co., Ltd. is the right choice. we are a well known best jewelry manufacturers jewelry companies Manufacturers and suppliers from China.
jewelry companies has a great positive reflects from our dear customers.
Foshan KeKe Jewelry Co., Ltd. are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: